Have a Question for us?

+603-89209219

Install Your Blinds

INSTALL YOUR BLINDS

INSTALL YOUR ECOLUX BLINDS

How To Install Your Ecolux Blinds

Fitting your new made-to-measure blinds is straight forward. It is recommended that you have the following tools when fitting your blinds.

Item Checklist:
  • Ecolux Blinds
  • Bracket
Tools you will need:
  • Drill
  • Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  • Pencil
  • Metal Tape Measure

Four (4) Simple step to Install your blinds

1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.bidai_blinds_ecolux

2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.bidai_blinds_ecolux6bidai_blinds_ecolux_install

3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.bidai_blinds_ecolux7

bidai_blinds_ecolux94. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket.bidai_blinds_ecolux8bidai_blinds_ecolux2

Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean, regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.

INSTALL YOUR LANTEX BLINDS

How To Install Your Lantex Blinds

Fitting your new made-to-measure blinds is straight forward. It is recommended that you have the following tools when fitting your blinds.

Item Checklist:
  • Lantex Blinds
  • Bracket
Tools you will need:
  • Drill
  • Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  • Pencil
  • Metal Tape Measure

Four (4) Simple step to Install your blinds

1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.bidai_blinds_lantex

2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.bidai_blinds_lantex3

bidai_blinds_lantex63. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.bidai_blinds_lantex2

bidai_blinds_lantex54. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket.bidai_blinds_lantex1bidai_blinds_lantex4

Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean, regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.
INSTALL YOUR PANEL BLINDS

How To Install Your Panel Blinds

Fitting your new made-to-measure blinds is straight forward. It is recommended that you have the following tools when fitting your blinds.

Item Checklist:
  • Panel Blinds
  • Bracket
Tools you will need:
  • Drill
  • Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  • Pencil
  • Metal Tape Measure

Four (4) Simple step to Install your blinds

1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.bidai_blinds_panel3 bidai_blinds_panel4

2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.Bidai_blinds_panel5Bidai_blinds_panel2

3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.Bidai_blinds_panel4Bidai_blinds_panel1

4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket.Bidai_blinds_panel3Bidai_blinds_panel

Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean, regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.
INSTALL YOUR ROLLER BLINDS

How To Install Your Roller Blinds

Fitting your new made-to-measure blinds is straight forward. It is recommended that you have the following tools when fitting your blinds.

Item Checklist:
  • Roller Blinds
  • Bracket
Tools you will need:
  • Drill
  • Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  • Pencil
  • Metal Tape Measure

Four (4) Simple step to Install your blinds

1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.bidai_blinds_rollerceilingbidai_blinds_roller

2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.bidai_blinds_roller1bidai_blinds_roller4

3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.bidai_blinds_roller2bidai_blinds_roller5

4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket.bidai_blinds_roller3bidai_blinds_roller6 Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean, regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.
INSTALL YOUR ROMAN BLINDS

How To Install Your Roman Blinds

Fitting your new made-to-measure blind is straightforward. It is recommended that you have the following tools when fitting your blinds.

Item Checklist:
  • Roman Blinds
  • Bracket
Tools you will need:
  • Drill
  • Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  • Pencil
  • Metal Tape Measure

Four (4) Simple step to Install your blinds

1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.bidai_blinds_roman

2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.bidai_blinds_roman3bidai_blinds_roman6

3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.bidai_blinds_roman2bidai_blinds_roman5

4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket.bidai_blinds_roman1bidai_blinds_roman4

Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean, regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.

INSTALL YOUR VENETION BLINDS

How To Install Your Venetion Blinds

Fitting your new made-to-measure blinds is straight forward. It is recommended that you have the following tools when fitting your blinds.

Item Checklist:
  • Venetion Blinds
  • Bracket
Tools you will need:
  • Drill
  • Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  • Pencil
  • Metal Tape Measure

Four (4) Simple step to Install your blinds

1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.bidai_blinds_venetion

2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.bidai_blinds_venetion5bidai_blinds_venetion1

3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.bidai_blinds_venetion6bidai_blinds_venetion2

4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket.bidai_blinds_venetion7bidai_blinds_venetion3

Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean, regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.
INSTALL YOUR VERTICAL BLINDS

How To Install Your Vertical Blinds

Fitting your new made-to-measure blind is straightforward. It is recommended that you have the following tools when fitting your blinds.

Item Checklist:
  • Vertical Blinds
  • Bracket
Tools you will need:
  • Drill
  • Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  • Pencil
  • Metal Tape Measure

Five (5) Simple step to Install your blinds

1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.bidai_blinds_vertical7ceiling bidai_blinds_vertical7 2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.bidai_blinds_vertical4 bidai_blinds_vertical1 3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug. 4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket.bidai_blinds_vertical5 bidai_blinds_vertical2

4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket.bidai_blinds_vertical6 bidai_blinds_vertical3

5. Rotate track carriers so the hooks face to one end of the track. Spread the carriers out by drawing the cord or wand. Gently unroll slats and hook onto carriers working from one end of the track to the other. Do Not hang whilst carriers are rotated to the flush position to the track. This will cause the slats to not rotate and jam.If your track has a centre opening and chained weights. Open the slats after hanging, then gently partially open the blinds and trim the chain in the centre where they are dividingbidai_blinds_vertical11

Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean, regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.
INSTALL YOUR WOODEN BLINDS

How To Install Your Wooden Blinds

Fitting your new made-to-measure blind is straightforward. It is recommended that you have the following tools when fitting your blinds.

Item Checklist:
  • Wooden Blinds
  • Bracket
Tools you will need:
  • Drill
  • Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  • Pencil
  • Metal Tape Measure

Four (4) Simple step to Install your blinds

1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.bidai_blinds_wooden4

2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.bidai_blinds_wooden15bidai_blinds_wooden1

3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.bidai_blinds_wooden6 bidai_blinds_wooden2

4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket.bidai_blinds_wooden7 bidai_blinds_wooden3

Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean, regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.
INSTALL YOUR ZEBRA BLINDS

How To Install Your Zebra Blinds

Fitting your new made-to-measure blinds is straight forward. It is recommended that you have the following tools when fitting your blinds.

Item Checklist:
  • Zebra Blinds
  • Bracket
Tools you will need:
  • Drill
  • Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  • Pencil
  • Metal Tape Measure

Four (4) Simple step to Install your blinds

1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.bidai_blinds_zebra3ceiling bidai_blinds_zebra42. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.bidai_blinds_zebra bidai_blinds_zebra6

3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug. bidai_blinds_zebra1bidai_blinds_zebra7

4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket.bidai_blinds_zebra2 bidai_blinds_zebra8

Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean, regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.