Fitting your new made-to-measure blind is straightforward. It is recommended that you have the following tools when fitting your blinds.
Tools you will need:
1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.
2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.
3. Drill your holes and then screw the brackets into place. You’ll also need to use wall plug.
4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket.