• No. 199, Jalan 8/1, Seksyen 8, Bandar Baru Bangi
  • enquiries@bidai.com.my

(+603) 8920 9219

0

How to Fit Your Blinds - Bidai

  • Home
  • How to Fit Your Blinds

How To Fit Your Ecolux Blinds

Installation

Fitting your new made-to-measure blind is straightforward. It is recommended that you have the following tools when fitting your blinds. Item Checklist:

  1. Ecolux Blinds
  2. Brecket

Tools you will need:

  1. Drill
  2. Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  3. Pencil
  4. Metal Tape Measure

5 Simple step to Install your blinds

  1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.
  2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.
  3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.

IMG_4616 4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket. IMG_4609 Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.

Install Your Lantex Blinds

How To Fit Your Lantex Blinds

Installation

Fitting your new made-to-measure blind is straightforward. It is recommended that you have the following tools when fitting your blinds. Item Checklist:

  1. Lantex Blinds
  2. Brecket

Tools you will need:

  1. Drill
  2. Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  3. Pencil
  4. Metal Tape Measure

5 Simple step to Install your blinds

  1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.
  2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.
  3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.

IMG_4616 4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket. IMG_4609 Handy Hints

  • When installing large blinds, it helps to have someone support the blinds when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.

Install Your Panel Blinds

How To Fit Your Panel Blinds

Installation

Fitting your new made-to-measure blind is straightforward. It is recommended that you have the following tools when fitting your blinds. Item Checklist:

  1. Panel Blinds
  2. Brecket

Tools you will need:

  1. Drill
  2. Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  3. Pencil
  4. Metal Tape Measure

5 Simple step to Install your blinds

  1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.
  2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.
  3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.

IMG_4616 4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket. IMG_4609 Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.

Install Your Roller Blinds

How To Fit Your Roller Blinds

Installation

Fitting your new made-to-measure blind is straightforward. It is recommended that you have the following tools when fitting your blinds. Item Checklist:

  1. Roller Blinds
  2. Brecket

Tools you will need:

  1. Drill
  2. Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  3. Pencil
  4. Metal Tape Measure

5 Simple step to Install your blinds

  1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.
  2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.
  3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.

IMG_4616 4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket. IMG_4609 Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.

Install Your Roman Blinds

How To Fit Your Roman Blinds

Installation

Fitting your new made-to-measure blind is straightforward. It is recommended that you have the following tools when fitting your blinds. Item Checklist:

  1. Roman Blinds
  2. Brecket

Tools you will need:

  1. Drill
  2. Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  3. Pencil
  4. Metal Tape Measure

5 Simple step to Install your blinds

  1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.
  2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.
  3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.

IMG_4616 4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket. IMG_4609 Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.

Install Your Venetion Blinds

How To Fit Your Venetion Blinds

Installation

Fitting your new made-to-measure blind is straightforward. It is recommended that you have the following tools when fitting your blinds. Item Checklist:

  1. Ecolux Blinds
  2. Brecket

Tools you will need:

  1. Drill
  2. Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  3. Pencil
  4. Metal Tape Measure

5 Simple step to Install your blinds

  1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.
  2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.
  3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.IMG_4616IMG_4606
  4. Mounting Blind Place the front hooks of the brackets to the inside front edge of the head rail. Rotate the headrail up into the rear of the bracket and lock into place. Large Blinds may require two people to support the blind to prevent damaging the headrail IMG_4609

Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.

Install Your Vertical Blinds

How To Fit Your Vertical Blinds

Installation

Fitting your new made-to-measure blind is straightforward. It is recommended that you have the following tools when fitting your blinds. Item Checklist:

  1. Ecolux Blinds
  2. Brecket

Tools you will need:

  1. Drill
  2. Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  3. Pencil
  4. Metal Tape Measure

6 Simple step to Install your blinds

  1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.
  2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.
  3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.IMG_4616IMG_4606
  4. Hanging the Track Take the Vertical track and starting with the central bracket, hook the front of the track into the forward lip of the bracket. Making sure the track is centre to the window. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket.IMG_4609
  5. Hanging the Slats Carrier = Hook Rotate track carriers so the hooks face to one end of the track. Spread the carriers out by drawing the cord or wand. Gently unroll slats and hook onto carriers working from one end of the track to the other. Do Not hang whilst carriers are rotated to the flush position to the track. This will cause the slats to not rotate and jam. If your track has a centre opening and chained weights., Open the slats after hanging, then gently partially open the blind and trim the chain in the centre where they are dividing.

Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.

Install Your Wooden Blinds

How To Fit Your Wooden Blinds

Installation

Fitting your new made-to-measure blind is straightforward. It is recommended that you have the following tools when fitting your blinds. Item Checklist:

  1. Wooden Blinds
  2. Brecket

Tools you will need:

  1. Drill
  2. Phillips screwdriver or Phillips drill bit (the one with the crossedhead)
  3. Pencil
  4. Metal Tape Measure

5 Simple step to Install your blinds

  1. Gather your tools and unpack your blind, inside the box you will find all the fixture and fittings that you will need.
  2. Now, having decided where you want the blind to be positioned mark out the drill holes using the brackets supplied, in most cases you will only need to drill 2 holes at either end. Wider blinds will need more holes drilling though extra brackets will be supplied if this is required.
  3. Drill your holes and then screw the brackets into place. You'll also need to use wall plug.

IMG_4616 4. Fit the blind into the brackets. Now just click the track into place by rotating the back of the track up into the rear of the bracket. You should hear it click into place. Repeat for each bracket. IMG_4609 Handy Hints

  • When installing large blinds, it helps to have someone support the blind when lifting onto the brackets. This also helps prevent the head-rail from breaking and voiding the warranty.
  • To clean regularly dust with feather duster or brush attachment on vacuum.
  • If you have multiple blinds, make sure to lay each one out at the individual windows before installing the first one. This will ensure that you have the correct blinds at each window before positioning into place.


© 2017 Interrio, All Rights Reserved